Features:

JPL type vertical mixing mortar pump and spraying machine Wen Gong introduced German Putzmeister technology in the 1990s. Based on the JP pumping spraying machine, a high-speed mixing mortar vertical forced mixer was added. The special mixing effect makes the whole machine's pressure pumping, spraying mortar or grouting operation more stable and smooth. After more than 20 years of continuous innovation, the product has ten outstanding technologies:
The main motor of the screw pump is provided by the German NORD company. The biggest feature of this motor is that the motor power factor and motor efficiency are both internationally advanced indicators. In addition, according to user needs, domestic high-quality servo motor Y2 series asynchronous motor and internal combustion engine are selected as the prime mover.
The supporting main motor transmission is divided into mechanical stepless transmission, frequency modulation, and winding technologies. The common features of the reducers are high-strength gear combinations, wear-resistant and high-temperature resistance, and the application of reinforced radial and axial output bearings and high-precision sealing. device.
The stator (also known as rubber sleeve) of the screw pump is made of polymer materials combined with pure natural rubber. It has passed the infrared spectrum comparison comprehensive test (analysis report document) by the Key Laboratory of Polymer Science and Technology of Northwestern Polytechnical University (National Rubber Material Testing Unit) No.: Northwestern Polytechnical University NO: F2013022), it was concluded that the rubber material of the screw pump stator is similar to that of similar foreign products.
The machine is equipped with a unique screw pump (rotor, stator) that allows you to instantly load and unload guide rails on site, update and disassemble the screw pump (rotor, stator), and there is no need to be cumbersome or overwhelmed.
Unique drive shaft design: The main shaft is made of high-strength hexagonal steel that resists bending and torsion, and is equipped with intermittent spiral pieces (different from winding spiral belts). Both ends are equipped with high-strength stainless steel cross-joints formed by pressure precision casting, which not only has good alignment It has transmission function and can repeatedly stir the slurry twice to ensure that the mortar in the silo does not segregate, precipitate, or bleed, and can improve the thixotropy of the mortar.
The nozzle (pressure gauge seat) is made of high-strength stainless steel pressure precision casting. It is not only wear-resistant and anti-corrosion, but also has a smooth inner cavity to reduce the resistance of the slurry passing through, ensuring no slurry and smooth discharge.
The special driving component sealing mechanism includes multi-stage adjustable sealing rings, double combined sealing rings, moving water retaining rings, and drainage channels, thereby ensuring that the drive variable speed motor is not penetrated by slurry and the transmission gear is not damaged.
The mixer blade structure technology of JPL vertical forced mixer adopts the world-famous Italian SlCOMA concrete mixing technology version. The vertical mixer has built-in inward curved three-dimensional blades, and the horizontal mixer has built-in reverse interrupted arc three-dimensional propeller blades, all of which are uniformly shaped. At an angle, the mixed combination material generates strong radial flow and axial flow, forming a multi-flow circulating vortex. The contact surface between the mixing combinations is large, the size of the slurry micelle is reduced, and the particulate aggregate is densely packed and fully mixed. .
The discharging opening and closing door of the mixer adopts Italian IMER technology and German PUTZMEISTER technology, which has strong sealing performance and is fully capable of mixing liquid materials and mixing processes of releasing water first and then adding materials. Compared with similar products on the market, there is no anhydrous residual dry material.
Unique anti-wear technology for electronically controlled screw pumps (stators and rotors). In order to avoid excessive wear of the machine during operation and improve its anti-wear capabilities, an anti-wear limit mechanism is set up to effectively extend the service life of the screw pump.

Technical Parameters:

Model	JPL-50	JPL-60	JPL-70	JPL-80	JPL-90
power supply	380V 50HZ	380V 50HZ	380V 50HZ	380V 50HZ	380V 50HZ
Maximum displacement	50L/min	60L/min	70L/min	80L/min	90L/min
Delivery pressure	30bar	30bar	30bar	30bar	30bar
Pumping distance	60m	60m	60m	100m	100m
Pumping height	40m	40m	40m	40m	40m
Main motor power	4.5/5.5 KW	4.5/5.5 KW	4.5/5.5 KW	6.5/8 KW	6.5/8 KW
Mixing capacity	120L	120L	120L	120L	120L
Stirring motor powe	3KW	3KW	3KW	3KW	3KW
Machine size	1740*770*1310mm	2180*770*1310mm	1980*770*1310mm	2100*770*1310mm	2180*770*1310mm
Weight	335KG	370KG	400KG	400KG	400KG